Shop: KEVINS FULL SVC AMOCO INC
Date: 7/8/2008
First off the timing is critical, when they say 3 seconds and 7 seconds that must be exact. Step 3 when you push the pedal 5 times the mil light will start to blink then hold the pedal down until the mil light goes steady then in 3 seconds release the pedal and start the vehicle. Let it ilde for 1 minute. It took me several tries to make it work but it does work. Kevin Call
Tip: Blend door not working?? Don't Pull The Dash!!
Shop: CHUBBUCK MOTORS
Date: 7/7/2008
1999 Dodge Pickup R2500
If you have a blend door that isn't working like it should, check the motor which can easily been seen from the passenger side floor board. If the motor is working, don't do what I did (pull the dash), just pull the motor. There is a small piece of plastic that attaches the motor to the metal blend door that easily breaks and is serviceable on its own.
Date: 7/7/2008
1999 Dodge Pickup R2500
If you have a blend door that isn't working like it should, check the motor which can easily been seen from the passenger side floor board. If the motor is working, don't do what I did (pull the dash), just pull the motor. There is a small piece of plastic that attaches the motor to the metal blend door that easily breaks and is serviceable on its own.
Subscribe to:
Posts (Atom)
